Titanium Pipe Fittings ASTM B363 ASME SB363

Titanium pipe fittings

Standard: ASTM B363 / ASME SB363

Material: GR.1, GR.2, GR.3, GR.5, GR.9, GR.12

Type: Seamless and Welded

1, Elbow 45°, elbow 90°, elbows 180°, short radius(R=1.0) Long radius(R=1.5D)

2, Tee, cross (equal, reduce)

3, Reducing (concentric non-concentric)

4, Weld ring (stub end)

5, Cap

6, Pipe Clamp

Quick Inquiry

Description Name: Titanium fittings, Titanium elbow, Titanium stub-end, Titanium reducer, Titanium pipes

DN range: DN15-1200

Thickness range: 2-20mm

Titanium pipe fitting ASME SB338 GR.2 Chemical Composition:

Steel Grade	Composition %
Steel Grade	Nitrogen Max	Carbon Max	Hydrogen Max	Iron Max	Oxygen Max	Residuals Max Each	Residuals Max Total	Titanium
Gr.2	0.03	0.08	0.015	0.3	0.25	0.1	0.4	Balance

Click to download the details of TITANIUM PIPE FITTINGS ASTM B363 ASME SB363.

Titanium pipe fitting ASME SB338 GR.2 Tensile Requirements

Grade	Tensile Strength, Min		Yield Strength, 0.2% Offset				Elongation in 2 in. or 50mm Min, %
			Min		Max
	Ksi	Mpa	Ksi	Mpa	Ksi	Mpa
Gr.2	50	345	40	275	65	450	20

Quick Inquiry

Flattening Test

Tubing shall withstand, without cracking, flattening under a load applied gradually at room temperature until the distance between the load platens is not more than H in. H is calculated as SB338 standard.

Flaring Test

For tube 3 1/2 in.(88mm) in outside diameter and smaller, and 0.134 in.(3.4mm) in wall thickness and thinner, a section of tube approximately 4 in.(102mm) in length shall withstand being flared with a tool having a 60° included angle until the tube at the mouth of the flare has been expanded in accordance with table4 the flared end shall show no cracking or rupture visible to the unaided eye. Flaring tests on larger diameter tube or tubing outside the range of standard shall be as agreed upon between the manufacturer and the purchaser.