ASME SB338 Gr.2 Seamless and welded Titanium Tubes for Condensers and Heat Exchangers
Titanium Tubes ASME SB338 Grade 2
Standard: ASTM B338 / ASME SB338
Type: Seamless and Welded
Description Name: ASME SB338 Titanium Gr.2 Tubes, ASME SB338 Gr.2 Titanium tubes, ASTM B338 Titanium Gr.2 seamless tubes, Titanium Alloy Grade 2 seamless pipes, Titanium Alloy Gr.2 tubes, Gr.2 Titanium alloy tubing
Diameter range: 6-219mm
Thickness range: 0.5-12mm
Length: Single random length/ Double random length or as customer’s actual request
Max length 12000mm
Titanium tubes ASME SB338 GR.2 Chemical Composition:
|Steel Grade||Composition %|
Click to download the details of Titanium Tubes ASME SB338 GR.2.
Titanium tubes ASME SB338 GR.2 Tensile Requirements
|Grade||Tensile strength, min||Yield Strength, 0.2% Offset||Elongation|
|ksi||Mpa||min||max||2 in. or 50mm,|
Tubing shall withstand, without cracking, flattening under a load applied gradually at room temperature until the distance between the load platens is not more than H in. H is calculated as SB338 standard.
For tube 3 1/2 in.(88mm) in outside diameter and smaller, and 0.134 in.(3.4mm) in wall thickness and thinner, a section of tube approximately 4 in.(102mm) in length shall withstand being flared with a tool having a 60°included angle until the tube at the mouth of the flare has been expanded in accordance with table4 the flared end shall show no cracking or rupture visible to the unaided eye. Flaring tests on larger diameter tube or tubing outside the range of standard shall be as agreed upon between the manufacturer and the purchaser.
Hydrostatic or Nondestructive Testing
Welded tubing shall be tested using both a nondestructive electromagnetic test and an ultrasonic test as described in standard. Seamless and welded/cold worked tubing shall be tested using an ultrasonic test as described in standard.
Welded or seamless tubing shall be tested with a hydrostatic or pneumatic test as described in standard. Other requirements details can check standard.
Each length of tube 1/2 in. (13mm) in outside diameter and larger, manufactured in accordance with this specification, shall be legibly marked, either by stenciling, stamping, or rolling, with the manufacture’s private identifying mark, the ASTM designation, the tube class, the grade, and heat number. On smaller than 1/2 in. outside diameter tubing that is bundled, the same information may be legibly stamped on a metal tag securely attached to each bundle.
Titanium tubes ASME SB338 GR.2
Titanium tubes ASME SB338 GR.2 Packaging
Packed in ply wooden box wrapped in plastic, and suitably protected for sea-worthily delivery or as requested.
Get in Touch
If you are interested in our products or service, please contact us now.
Tel.: +86 185 5109 0083 | E-mail: firstname.lastname@example.org